CHT® BiMetal Coated Nozzle E3D Volcano compatible
1.75 mm / 0.4 mm

50% increased Volumetric Flow for E3D Volcano hotends
€ 53.95  incl VAT
from € 53.95
Dispatches same business day!
Output diameter
Stock - NL: 10

Product description

Improved 3D printing with the Bondtech CHT BiMetal coated nozzle for maximum filament throughput for E3D Volcano compatible hot ends. This nozzle splits the filament in three separate strings like the other CHT nozzles for increased heating efficiency by increasing the surface. The BiMetal nozzle improves further upon this by using the better heat conducting copper metal for the nozzle body o maximize the thermal performance. The Hardened Vanadium Steel tips provide a robust anti-wear tip that can print abrasive materials like carbon and glass fiber composite materials. Finally the nickel coating protects the nozzle against corrosion, erosion and abrasion.

You can easily swap the nozzle in your Volcano hotend with the Bondtech CHT BiMetal nozzle. It is however important to heat the hotend up to at least 250 °C (280 °C preferred) if you want the exchange the CHT BiMetal nozzle again to avoid damage. 

Do not use more than 1.5Nm torque to either fasten or loosen the nozzle as ore force may damage the nozzle. For abrasive filaments use 0.6mm nozzles or bigger, while filament with glitter and can be printed using a 0.4mm nozzle. 

This is the Volcano version nozzle, which is compatible with many 3D printers and hotends, including:

  • E3D Volcano blocks
  • Other Volcano type blocks
  • Artillery Sidewinder X1 and X2
  • Anycubic Vyper
  • FLSUN Super Racer
  • Artillery Genius Pro
  • Anycubic Kobra and Kobra Max
  • Lulzbot TAZ MOARstruder

  • Nickel-coated nozzle
  • Copper and Hardened Vanadium Steel
  • Up to 50% more flow
  • Compatible with E3D Volcano hotends


sku BTCHTVOL2M175MM040
gtin 7350011415373
mpn 600-A-CHT-VOL-175-40
Nozzle properties
Hotend type E3D Volcano
Material Hardened steel
Specialty BiMetal
Output diameter 0.4 mm
Input diameter 1.75 mm

Copyright 2009 - 2023 | ReprapWorld