The Anycubic Photon Mono 4K is a great choice if you want to make high-precision 3D prints with Resin! This 3D printer has an excellent value for money and gives you an impressive 4K resolution (3840x2400 pixels) with high-power UV LEDs, which can be adjusted in strength to make the most beautiful 3D prints. The accuracy is further improves thanks to the 400:1 contrast ratio, decreasing the 'bleeding' of the 3D print's edges. The monochrome's display lifetime expectancy is also up to four times higher than regular RGB displays, for enjoying continued 3D printing.
While the build volume is a more or less standard 132 x 80 x 165 mm, giving you enough surface for most 3D models, the above average printing speed of 5cm/hour and high-intensity light source give a lot of bang for buck. The sturdy design with solid Z-axis has a great dimensional accuracy, improving the 3D print's layer quality dramatically. The Printer uses 405nm UV so most LCD Resins are compatible with this 3D printer.
For safety the 3D printer comes with UV protective cover, both protecting your precious 3D prints from unwanted outside UV light as well as yourselves from the UV generated by the printer. The printer uses FEP sheets which can be changed quickly and for convenience the resin tank has marking to indicate the Resin level left in the machine.
While working with 3D resin we recommend 3D printing in a well-ventilated room and using gloves while handling 3D resin.
|3D printer properties|
The maximum volume what can be 3D printed with this machine. This normally is almost the size of the printbed times the height the head can be above the bed.
|Type of 3D printer||SLA/DLP|
For most entry-level, smaller 3D printers this is a single threaded rod. For bigger machines the Z-axis moves with two rods, while 3D printers with a bed plate that moves in the Z-axis typically have three or four rods to move.
Bed movement direction
The direction the buildplate moves. Most printers move the build plate in the Y-axis direction. This is a simpler design, but gives problems at greater build height, because the inertia of the mass of the buildplate + 3D print impact the quality of the layers, requiring you to limit the speed. Other printers move in the Z-axis, allowing you to print faster without trading quality of the layer build-up.
|Product Dimensions||383x227x222 mm|
|UV Wavelength||405 nm|
|LCD Display technology||Monochrome LCD|
Size of the diagonal of the display in inch.
Number of pixels (points) of the display in the length and width
Resin LCD type
Type is display used to emit UV light
|4K Monochrome LCD|
|Type of control interface||Touch screen|
|Max. Power rating||45 W|
Discover products that go hand in hand with the Photon Mono 4K. These are products that have been purchased the most with the Photon Mono 4K. Do not miss out on items that will cut down on time, boost efficiency, and provide the best experience.
Discover all the parts and accessories that you can use with the Photon Mono 4K. These products are here to support your project at every step of the way. Select premium supplies that provide expert solutions.
Find compatible resin for your 3D printer