With this Anycubic SLA 3D printer you can make resin 3D prints with a maximum of 13x7.8x16 cm at great speed: it can go up to a speed of 80 mm per hour. It is 2-3 times faster than a regular LCD screen, because of the new Matrix parallel light source which results in a uniform exposure, higher efficiency and a better heat dissipation. The high performance Z-axis is extremely stable thanks to the dual linear rails and improved mounting, while you can setup and level the 3D printer in minutes thanks to the easy bed leveling system.
You can design your models with the updated user-friendly Anycubic Slicer software, which now enables you to add text and has the ability to split your model. You can also download the Anycubic app that allows you to adjust printer settings, remotely control the printer and monitor the progress from your phone.
The following items are included in the box:
|3D printer properties|
The maximum volume what can be 3D printed with this machine. This normally is almost the size of the printbed times the height the head can be above the bed.
|Resolution X axis||0.051 mm|
|Resolution Y axis||0.051 mm|
|Type of 3D printer||SLA/DLP|
For most entry-level, smaller 3D printers this is a single threaded rod. For bigger machines the Z-axis moves with two rods, while 3D printers with a bed plate that moves in the Z-axis typically have three or four rods to move.
Bed movement direction
The direction the buildplate moves. Most printers move the build plate in the Y-axis direction. This is a simpler design, but gives problems at greater build height, because the inertia of the mass of the buildplate + 3D print impact the quality of the layers, requiring you to limit the speed. Other printers move in the Z-axis, allowing you to print faster without trading quality of the layer build-up.
|Product Dimensions||400x400x400 mm|
|Print speed (Z-axis)||80 mm/h|
|UV Wavelength||405 nm|
|LCD Display technology||Monochrome LCD|
Size of the diagonal of the display in inch.
Number of pixels (points) of the display in the length and width
Resin LCD type
Type is display used to emit UV light
|2K Monochrome LCD|
A SD Card in your printer will allow you to store prints and print them directly from SD. This is more reliable than a USB connection and allows you to power down your computer.
This feature allows your printer to be controlled over a WIFI network. You can execute movements as well as start a print.
|Input voltage||110/240 V|
|Max. Power rating||55 W|
|Laser engraving properties|
Looking for a comparable product to the Photon Mono SE - SLA 3D Printer? Explore our selection of similar alternatives in place so that you always have a variety of options for any project. Feel free to reach out to us for advice on the alternatives.
Discover products that go hand in hand with the Photon Mono SE - SLA 3D Printer. These are products that have been purchased the most with the Photon Mono SE - SLA 3D Printer. Do not miss out on items that will cut down on time, boost efficiency, and provide the best experience.
Discover all the parts and accessories that you can use with the Photon Mono SE - SLA 3D Printer. These products are here to support your project at every step of the way. Select premium supplies that provide expert solutions.
Find compatible resin for your 3D printer