Scaffold filament Gray 1.75mm / 0.5 kg spoolWorks

€ 60.53  incl VAT
from € 67.25
Stock - NL: 14

Product description

Scaffold is a water-soluble support filament for professional 3D printing. This is the gray 1.75mm version.

This filament from the spoolWorks line from E3D offers you the design freedom you are looking for.


  • Breaks away/dissolves in normal tap water;
  • This filament is PVA/PVOH based, but is easy to print with low viscosity;
  • It has a low heat degradation and can be easily removed from nozzles;
  • The ideal print temperature is 215 degrees Celsius;
  • The bed temperature is best between 20 and 55 degrees Celsius, but it should work up to 110 degrees Celcius;
  • The printing speed is around 50mm/s.

Important notes:

  • If you want to get best out of this filament you have to create your own specific slicer settings;
  • You need to keep this filament dry;
  • Do not let the filament stay in the nozzle for extended periods. If that happens and the nozzle is hot, it will degrade and you will have a big change of clogging and damaging the nozzle;
  • All 3d printers are unique so make sure that you use the settings that work for you;
  • Before using we advice that you read the documentation carefully so will enjoy this filament the most.

For more information about this filament, please visit this website: Scaffold-Support-Material


sku E3DSWS175
gtin 8719345004650
Filament properties
Weight filament 500 g

The base material used in the filament. For more information on the different materials, please check the Filament information page

Variant PVA Plus
Color Gray
Diameter 1.75 mm
Diameter tolerance 0.05 mm
Printing properties
Temperature - extruder 210 °C
Temperature - heated bed 0 - 80 °C
Spool dimensions
Outer diameter 200 mm
Inner diameter 55 mm
Width 65 mm
Weight spool 300 g
Length filament 330 m

Related productsRelated products

Discover products that go hand in hand with the Scaffold filament Gray 1.75mm / 0.5 kg spoolWorks. These are products that have been purchased the most with the Scaffold filament Gray 1.75mm / 0.5 kg spoolWorks. Do not miss out on items that will cut down on time, boost efficiency, and provide the best experience.

KWB Sanding Paper K180 (Fine) Roll of 93 mm x 5m
Roll of general purpose K180 (Fine) sanding paper to sand your 3D prints
  € 4.95
Spatula tool|80 mm
Sturdy stainless steel cleaning spatula for easy removal of 3D prints
  € 4.95
Hygrometer with thermometer
  € 6.50

Copyright 2009 - 2023 | ReprapWorld